RYD-IIE Type Warm Direct Current Drug Introduction Apparatus

1000

Main Technical Parameters of RYD-IIE Warm DC Drug Introduction Apparatus

Operating Conditions

(1) Ambient temperature: 5℃ to 40℃.

(2) Relative humidity: ≤80%.

(3) Atmospheric pressure: 500hPa to 1060hPa.

(4) Operating voltage: AC 220V±22V, 50Hz±1Hz.

(5) Input power: 100VA+15VA.

Main Technical Parameters of RYD-IIE Warm DC Drug Introduction Apparatus

*(1) Output channels: Four channels, independently controlled.

*(2) Pulse frequency: 1000Hz, error ±15%. 

*(3) Pulse width: 0.4ms, error ±30%.

(4) Charge per pulse: When output amplitude is at maximum, the charge per pulse should be greater than 7μC.

(5) Output current: Under a 500Ω load, the maximum effective output current should not exceed 80mA.

(6) Energy per single pulse: When output pulse width is less than 0.1s, the maximum energy output per single pulse should not exceed 300mJ.

(7) Peak output voltage when the apparatus is open circuit: Not greater than 500V.

*(8) Treatment modes: DC intermediate frequency introduction, massage introduction, constant output and modulated output can be switched arbitrarily.

*(9) Treatment time: 5 to 60 minutes (divided into 12 levels), error ±10%, countdown timer with audible alert at completion.

*(10) Electrode heating temperature: Room temperature to 55℃. Switch controlled.   

*(11) Digital display: Treatment mode, output intensity, treatment time, treatment prompt tone.

(12) Safety type: Class I, BF type.

(13) Duty cycle: Intermittent loading, continuous operation.

(14) Dimensions: 490mm×400mm×200mm.

(15) Weight: 8Kg.